How To Reduce The Wear Of HDPE Double Wall Corrugated Pipe?

As we all know, HDPE double wall corrugated pipe is actually a new type of pipe with smooth outer wall and smooth inner wall. It is widely used because of its low temperature resistance, impact resistance, good wear resistance and long service life. The good wear resistance of pipes does not mean that they do not need protection, because once worn, it will have little impact on the appearance, and in severe cases it may directly affect use. Therefore, it should be protected during normal storage and transportation so

How To Reduce The Wear Of HDPE Double Wall Corrugated Pipe?

• First of all, during the entire process of storing and keeping pipe fittings, please remember that there is no need to put all kinds of high-density polyethylene double wall corrugated pipes together immediately, but try to use some protective equipment for protection. In addition, during the installation process , there is no need to wipe the floor immediately to move the pipe, because this can easily cause the surface of the pipe to come into direct contact with various hard blocks on the road, which may cause scratches.
• Secondly, when stacking HDPE double wall corrugated pipes together, please remember to keep a good distance and ensure that pipes of different sizes are stored separately. This is not only more conducive to market sales and delivery, but also further avoids excessive friction and scratches.
• Third, during the entire process of installation, laying, maintenance and disassembly, relevant special tools should be placed correctly. During the entire process of lifting pipe fittings, the actual operating professional technicians must remember that there is no place to put all kinds of sharp and hard tools. Special tools can easily cause scratches of varying degrees.
• Fourth, during storage, there should be no hard or sharp objects in the natural environment to prevent the pipe surface and these objects from being damaged, causing scratches and damage.
• Fifth, although HDPE double wall corrugated pipes currently use qualified raw materials, during the entire process of application, installation, and disassembly, it is important to remember that all inner holes of the pipe joints cannot touch other hard objects, which will also cause scratches.

Therefore, in order to reduce the wear of HDPE double wall corrugated pipes to a small extent, it is an effective measure to reduce wear during storage methods, installation, laying and maintenance, and to avoid contact with sharp objects in the natural environment.